Base of the fade
Number 0 haircut: the bare blade leaves about 0.5–0.8 mm (about 1/32 inch)
The bare clipper blade, no guard attached. A dark stubble shadow; the base of many shadow fades.
- Millimetres
- about 0.5–0.8 mm
- Inches
- about 1/32″
- Of longest comb
- 3%
- Grows to a #½
- about 2–3 days
Compare
#0 vs Skin vs #½
The sizes either side are the ones you are most likely deciding between. One step on a guard is a small change in millimetres, but it shows: shorter means more scalp shows through, longer means more colour and a softer outline.
| Guard | Length | vs #0 | Where it’s used |
|---|---|---|---|
| Skin | 0 mm0 in | about 0.65 mm shorterNot a guard: finished with a foil shaver or razor. The shortest point of skin and bald fades. | Not a guard: finished with a foil shaver or razor. The shortest point of skin and bald fades. |
| #0 | about 0.5–0.8 mmabout 1/32″ | This pageThe bare clipper blade, no guard attached. A dark stubble shadow; the base of many shadow fades. | The bare clipper blade, no guard attached. A dark stubble shadow; the base of many shadow fades. |
| #½ | 1.5 mm1/16″ | about 0.85 mm longerA slightly softer shadow at the base, or the first step up from skin or a #0. | A slightly softer shadow at the base, or the first step up from skin or a #0. |
How it’s worn
A #0 all over or in a fade
All over, it is one of the shortest clipper cuts you can get without a razor or foil shaver: the scalp shows through.
In a fade it sits at the very bottom, where it replaces skin for a softer, darker base.
How to ask for it
- All over“Number zero, no guard all over, please.”
- Sides only“A #0 on the sides and back, longer on top.”
- Mid Fade“Mid fade, #0 at the bottom, blended through a #1 and #2 to a #4 at the temple.”
Example requests only. Your barber will adjust the steps to your hair, density and growth pattern.
Grow-out
How fast a #0 grows out
Scalp hair grows about 1 to 1.25 cm a month on average. From a fresh #0, this is roughly how long it takes to reach each longer guard length.
- #0 to #½ lengthabout 2–3 days
- #0 to #1 lengthabout 6–7 days
- #0 to #1½ lengthabout 9–12 days
- #0 to #2 lengthabout 13–16 days
Calculated from the average growth rate above. Individual rates vary widely: one review of scalp hair reports anywhere from 0.6 to 3.4 cm a month (Harkey, Forensic Science International, 1993).
Number 0 haircut questions
- How long is a number 0 haircut?
- A #0, the bare clipper blade, leaves about 0.5–0.8 mm of hair, which is about 1/32 inch. That is the length Wahl publishes; check the length printed on your own comb, because brands can label sizes differently.
- Is a #0 or a #½ shorter?
- A #0 is shorter. The higher the number, the more hair the guard leaves, and a #½ leaves about 0.85 mm more (1.5 mm).
- How long does a #0 take to grow to a #½?
- About 2–3 days, at an average scalp growth rate of about 1 to 1.25 cm a month. Your own rate can be faster or slower.
Lengths are the ones Wahl publishes for its standard guide combs; sources are listed on the haircut numbers chart. Other brands can label the same length with a different number, so the length printed on the comb is what counts.